ipmash@ipme.ru | +7-812-321-47-78
пн-пт 10.00-17.00
Институт проблем машиноведения РАН ( ИПМаш РАН ) Институт проблем машиноведения РАН ( ИПМаш РАН )

МИНОБРНАУКИ РОССИИ
Федеральное государственное бюджетное учреждение науки
Институт проблем машиноведения Российской академии наук

МИНОБРНАУКИ РОССИИ
Федеральное государственное бюджетное учреждение науки
Институт проблем машиноведения Российской академии наук

Study of mechanical properties of copper slag reinforced particulate polymer composite

Авторы:
K. Arunprasath, P. Amuthakkannan, V. Manikandan, S. Kavitha, B. Radhkrishnan
Страницы:
896-904
ДОИ (doi):
Аннотация:

Copper slag is one of the by-products that is extracted from the copper waste, during the smelting process. It is an environmentally friendly material that also, has some industrial benefits too. The composite prepared using this copper slag improves the mechanical strength of the products. From this, an idea to promote over some of the waste to enhance the strength of the composite for effective mechanical applications. In this paper, the tensile, flexural, and impact mechanical strength of the copper (Cu) slag powder in different weight percentages as 5wt. %, 10wt. %, 15wt. %, and 20wt. % were analyzed. The composites were fabricated with hand layup techniques. The mechanical properties of the composites were tested using the universal testing machine for tensile and flexural tests and Izod impact tester for an impact study. These results show the different mechanical behaviours of the varying copper weight percentage in the composites was observed with enhanced mechanical properties. SEM analysis gives information about the poor bonding, micropores, and lack of copper inclusion in the various weight percentage copper slag reinforced in the polyester composite.

Файл (pdf):
17:39
Используя этот сайт, вы соглашаетесь с тем, что мы используем файлы cookie.